Participant module (pp)
Generated from veranad --help of version v0.10.6 by scripts/gen-cli-reference.sh. Every transaction below executes on behalf of a corporation and is signed by an authorized operator; see the message catalog for the signer model and the surface that normally sends each message.
veranad tx pp
cancel-participant-op-request
Cancel a pending participant VP request. Can only be executed by the participant authority and only when the participant is in PENDING state.
Usage:
veranad tx pp cancel-participant-op-request [id] [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--aux Generate aux signer data instead of sending a tx
-b, --broadcast-mode string Transaction broadcasting mode (sync|async) (default "sync")
--chain-id string The network chain ID
--corporation account address or key name Group account (corporation) on whose behalf this message is executed
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it (when enabled, the local Keybase is not accessible)
--fee-granter string Fee granter grants fees for the transaction
--fee-payer string Fee payer pays fees for the transaction instead of deducting from the signer
--fees string Fees to pay along with transaction; eg: 10uatom
--from string Name or address of private key with which to sign
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically. Note: "auto" option doesn't always report accurate results. Set a valid coin value to adjust the result. Can be used instead of "fees". (default 200000)
--gas-adjustment float adjustment factor to be multiplied against the estimate returned by the tx simulation; if the gas limit is set manually this flag is ignored (default 1)
--gas-prices string Gas prices in decimal format to determine the transaction fee (e.g. 0.1uatom)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase only accessed when providing a key name)
-h, --help help for cancel-participant-op-request
--keyring-backend string Select keyring's backend (os|file|kwallet|pass|test|memory) (default "os")
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--node string <host>:<port> to CometBFT rpc interface for this chain (default "tcp://localhost:26657")
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality)
-o, --output string Output format (text|json) (default "json")
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json|direct-aux|textual), this is an advanced feature
--timeout-duration duration TimeoutDuration is the duration the transaction will be considered valid in the mempool. The transaction's unordered nonce will be set to the time of transaction creation + the duration value passed. If the transaction is still in the mempool, and the block time has passed the time of submission + TimeoutDuration, the transaction will be rejected.
--timeout-height uint DEPRECATED: Please use --timeout-duration instead. Set a block timeout height to prevent the tx from being committed past a certain height
--tip string Tip is the amount that is going to be transferred to the fee payer on the target chain. This flag is only valid when used with --aux, and is ignored if the target chain didn't enable the TipDecorator
--unordered Enable unordered transaction delivery; must be used in conjunction with --timeout-duration
-y, --yes Skip tx broadcasting prompt confirmation
create-or-update-participant-session
Create or update a participant session for credential exchange operations. At least one of --issuer-participant-id or --verifier-participant-id must be provided. Set --agent-participant-id and --wallet-agent-participant-id only when peer is a Verifiable User Agent.
Usage:
veranad tx pp create-or-update-participant-session [id] [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--agent-participant-id uint Optional agent credential issuer participant id (set only when peer is a Verifiable User Agent)
--aux Generate aux signer data instead of sending a tx
-b, --broadcast-mode string Transaction broadcasting mode (sync|async) (default "sync")
--chain-id string The network chain ID
--corporation account address or key name The group policy address (corporation) on whose behalf this message is executed
--digest string Optional digest derived from an issued or verified credential
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it (when enabled, the local Keybase is not accessible)
--fee-granter string Fee granter grants fees for the transaction
--fee-payer string Fee payer pays fees for the transaction instead of deducting from the signer
--fees string Fees to pay along with transaction; eg: 10uatom
--from string Name or address of private key with which to sign
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically. Note: "auto" option doesn't always report accurate results. Set a valid coin value to adjust the result. Can be used instead of "fees". (default 200000)
--gas-adjustment float adjustment factor to be multiplied against the estimate returned by the tx simulation; if the gas limit is set manually this flag is ignored (default 1)
--gas-prices string Gas prices in decimal format to determine the transaction fee (e.g. 0.1uatom)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase only accessed when providing a key name)
-h, --help help for create-or-update-participant-session
--issuer-participant-id uint ID of the issuer participant
--keyring-backend string Select keyring's backend (os|file|kwallet|pass|test|memory) (default "os")
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--node string <host>:<port> to CometBFT rpc interface for this chain (default "tcp://localhost:26657")
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality)
-o, --output string Output format (text|json) (default "json")
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json|direct-aux|textual), this is an advanced feature
--timeout-duration duration TimeoutDuration is the duration the transaction will be considered valid in the mempool. The transaction's unordered nonce will be set to the time of transaction creation + the duration value passed. If the transaction is still in the mempool, and the block time has passed the time of submission + TimeoutDuration, the transaction will be rejected.
--timeout-height uint DEPRECATED: Please use --timeout-duration instead. Set a block timeout height to prevent the tx from being committed past a certain height
--tip string Tip is the amount that is going to be transferred to the fee payer on the target chain. This flag is only valid when used with --aux, and is ignored if the target chain didn't enable the TipDecorator
--unordered Enable unordered transaction delivery; must be used in conjunction with --timeout-duration
--verifier-participant-id uint ID of the verifier participant
--wallet-agent-participant-id uint Optional wallet credential issuer participant id (set only when peer is a Verifiable User Agent)
-y, --yes Skip tx broadcasting prompt confirmation
create-root-participant
Create a new root participant for a credential schema. Can only be executed by the trust registry controller.
Usage:
veranad tx pp create-root-participant [schema-id] [did] [validation-fees] [issuance-fees] [verification-fees] [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--aux Generate aux signer data instead of sending a tx
-b, --broadcast-mode string Transaction broadcasting mode (sync|async) (default "sync")
--chain-id string The network chain ID
--corporation account address or key name Group account (corporation) on whose behalf this message is executed
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it (when enabled, the local Keybase is not accessible)
--effective-from timestamp (RFC 3339) Optional timestamp (RFC3339) from when the participant is effective (defaults to block time; must not be before block time)
--effective-until timestamp (RFC 3339) Optional timestamp (RFC3339) until when the participant is effective
--fee-granter string Fee granter grants fees for the transaction
--fee-payer string Fee payer pays fees for the transaction instead of deducting from the signer
--fees string Fees to pay along with transaction; eg: 10uatom
--from string Name or address of private key with which to sign
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically. Note: "auto" option doesn't always report accurate results. Set a valid coin value to adjust the result. Can be used instead of "fees". (default 200000)
--gas-adjustment float adjustment factor to be multiplied against the estimate returned by the tx simulation; if the gas limit is set manually this flag is ignored (default 1)
--gas-prices string Gas prices in decimal format to determine the transaction fee (e.g. 0.1uatom)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase only accessed when providing a key name)
-h, --help help for create-root-participant
--keyring-backend string Select keyring's backend (os|file|kwallet|pass|test|memory) (default "os")
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--node string <host>:<port> to CometBFT rpc interface for this chain (default "tcp://localhost:26657")
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality)
-o, --output string Output format (text|json) (default "json")
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json|direct-aux|textual), this is an advanced feature
--timeout-duration duration TimeoutDuration is the duration the transaction will be considered valid in the mempool. The transaction's unordered nonce will be set to the time of transaction creation + the duration value passed. If the transaction is still in the mempool, and the block time has passed the time of submission + TimeoutDuration, the transaction will be rejected.
--timeout-height uint DEPRECATED: Please use --timeout-duration instead. Set a block timeout height to prevent the tx from being committed past a certain height
--tip string Tip is the amount that is going to be transferred to the fee payer on the target chain. This flag is only valid when used with --aux, and is ignored if the target chain didn't enable the TipDecorator
--unordered Enable unordered transaction delivery; must be used in conjunction with --timeout-duration
--vs-operator account address or key name
--vs-operator-authz-fee-spend-limit cosmos.base.v1beta1.Coin (repeated)
--vs-operator-authz-msg-types strings
--vs-operator-authz-period duration
--vs-operator-authz-spend-limit cosmos.base.v1beta1.Coin (repeated)
--vs-operator-authz-with-feegrant
-y, --yes Skip tx broadcasting prompt confirmation
renew-participant-op
Renew a participant validation process for an existing participant:
- id: ID of the participant to renew
Usage:
veranad tx pp renew-participant-op [id] [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--aux Generate aux signer data instead of sending a tx
-b, --broadcast-mode string Transaction broadcasting mode (sync|async) (default "sync")
--chain-id string The network chain ID
--corporation account address or key name Group account (corporation) on whose behalf this message is executed
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it (when enabled, the local Keybase is not accessible)
--fee-granter string Fee granter grants fees for the transaction
--fee-payer string Fee payer pays fees for the transaction instead of deducting from the signer
--fees string Fees to pay along with transaction; eg: 10uatom
--from string Name or address of private key with which to sign
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically. Note: "auto" option doesn't always report accurate results. Set a valid coin value to adjust the result. Can be used instead of "fees". (default 200000)
--gas-adjustment float adjustment factor to be multiplied against the estimate returned by the tx simulation; if the gas limit is set manually this flag is ignored (default 1)
--gas-prices string Gas prices in decimal format to determine the transaction fee (e.g. 0.1uatom)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase only accessed when providing a key name)
-h, --help help for renew-participant-op
--keyring-backend string Select keyring's backend (os|file|kwallet|pass|test|memory) (default "os")
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--node string <host>:<port> to CometBFT rpc interface for this chain (default "tcp://localhost:26657")
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality)
-o, --output string Output format (text|json) (default "json")
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json|direct-aux|textual), this is an advanced feature
--timeout-duration duration TimeoutDuration is the duration the transaction will be considered valid in the mempool. The transaction's unordered nonce will be set to the time of transaction creation + the duration value passed. If the transaction is still in the mempool, and the block time has passed the time of submission + TimeoutDuration, the transaction will be rejected.
--timeout-height uint DEPRECATED: Please use --timeout-duration instead. Set a block timeout height to prevent the tx from being committed past a certain height
--tip string Tip is the amount that is going to be transferred to the fee payer on the target chain. This flag is only valid when used with --aux, and is ignored if the target chain didn't enable the TipDecorator
--unordered Enable unordered transaction delivery; must be used in conjunction with --timeout-duration
-y, --yes Skip tx broadcasting prompt confirmation
repay-participant-slashed-td
Repay the full slashed trust deposit of a participant. Can only be called by the corporation that owns the participant.
Note: This does not make the slashed participant reusable - a new participant must be requested.
Parameters:
- id: ID of the participant with slashed deposit to repay
- corporation: The group policy address (corporation) that owns the participant
Usage:
veranad tx pp repay-participant-slashed-td [id] --corporation [corporation] [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--aux Generate aux signer data instead of sending a tx
-b, --broadcast-mode string Transaction broadcasting mode (sync|async) (default "sync")
--chain-id string The network chain ID
--corporation account address or key name The group policy address (corporation) on whose behalf this message is executed
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it (when enabled, the local Keybase is not accessible)
--fee-granter string Fee granter grants fees for the transaction
--fee-payer string Fee payer pays fees for the transaction instead of deducting from the signer
--fees string Fees to pay along with transaction; eg: 10uatom
--from string Name or address of private key with which to sign
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically. Note: "auto" option doesn't always report accurate results. Set a valid coin value to adjust the result. Can be used instead of "fees". (default 200000)
--gas-adjustment float adjustment factor to be multiplied against the estimate returned by the tx simulation; if the gas limit is set manually this flag is ignored (default 1)
--gas-prices string Gas prices in decimal format to determine the transaction fee (e.g. 0.1uatom)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase only accessed when providing a key name)
-h, --help help for repay-participant-slashed-td
--keyring-backend string Select keyring's backend (os|file|kwallet|pass|test|memory) (default "os")
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--node string <host>:<port> to CometBFT rpc interface for this chain (default "tcp://localhost:26657")
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality)
-o, --output string Output format (text|json) (default "json")
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json|direct-aux|textual), this is an advanced feature
--timeout-duration duration TimeoutDuration is the duration the transaction will be considered valid in the mempool. The transaction's unordered nonce will be set to the time of transaction creation + the duration value passed. If the transaction is still in the mempool, and the block time has passed the time of submission + TimeoutDuration, the transaction will be rejected.
--timeout-height uint DEPRECATED: Please use --timeout-duration instead. Set a block timeout height to prevent the tx from being committed past a certain height
--tip string Tip is the amount that is going to be transferred to the fee payer on the target chain. This flag is only valid when used with --aux, and is ignored if the target chain didn't enable the TipDecorator
--unordered Enable unordered transaction delivery; must be used in conjunction with --timeout-duration
-y, --yes Skip tx broadcasting prompt confirmation
revoke-participant
Revoke a participant. Can be executed by the participant authority, a validator ancestor, or the trust registry controller.
Usage:
veranad tx pp revoke-participant [id] [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--aux Generate aux signer data instead of sending a tx
-b, --broadcast-mode string Transaction broadcasting mode (sync|async) (default "sync")
--chain-id string The network chain ID
--corporation account address or key name The group policy address (corporation) on whose behalf this message is executed
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it (when enabled, the local Keybase is not accessible)
--fee-granter string Fee granter grants fees for the transaction
--fee-payer string Fee payer pays fees for the transaction instead of deducting from the signer
--fees string Fees to pay along with transaction; eg: 10uatom
--from string Name or address of private key with which to sign
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically. Note: "auto" option doesn't always report accurate results. Set a valid coin value to adjust the result. Can be used instead of "fees". (default 200000)
--gas-adjustment float adjustment factor to be multiplied against the estimate returned by the tx simulation; if the gas limit is set manually this flag is ignored (default 1)
--gas-prices string Gas prices in decimal format to determine the transaction fee (e.g. 0.1uatom)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase only accessed when providing a key name)
-h, --help help for revoke-participant
--keyring-backend string Select keyring's backend (os|file|kwallet|pass|test|memory) (default "os")
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--node string <host>:<port> to CometBFT rpc interface for this chain (default "tcp://localhost:26657")
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality)
-o, --output string Output format (text|json) (default "json")
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json|direct-aux|textual), this is an advanced feature
--timeout-duration duration TimeoutDuration is the duration the transaction will be considered valid in the mempool. The transaction's unordered nonce will be set to the time of transaction creation + the duration value passed. If the transaction is still in the mempool, and the block time has passed the time of submission + TimeoutDuration, the transaction will be rejected.
--timeout-height uint DEPRECATED: Please use --timeout-duration instead. Set a block timeout height to prevent the tx from being committed past a certain height
--tip string Tip is the amount that is going to be transferred to the fee payer on the target chain. This flag is only valid when used with --aux, and is ignored if the target chain didn't enable the TipDecorator
--unordered Enable unordered transaction delivery; must be used in conjunction with --timeout-duration
-y, --yes Skip tx broadcasting prompt confirmation
self-create-participant
Self-create a new ISSUER or VERIFIER participant for schemas with OPEN management mode.
Usage:
veranad tx pp self-create-participant [role] [validator-participant-id] [did] --corporation [corporation] [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--aux Generate aux signer data instead of sending a tx
-b, --broadcast-mode string Transaction broadcasting mode (sync|async) (default "sync")
--chain-id string The network chain ID
--corporation account address or key name The group policy address (corporation) on whose behalf this message is executed
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it (when enabled, the local Keybase is not accessible)
--effective-from timestamp (RFC 3339) Optional timestamp (RFC3339) from when the participant is effective (defaults to block time; must not be before block time)
--effective-until timestamp (RFC 3339)
--fee-granter string Fee granter grants fees for the transaction
--fee-payer string Fee payer pays fees for the transaction instead of deducting from the signer
--fees string Fees to pay along with transaction; eg: 10uatom
--from string Name or address of private key with which to sign
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically. Note: "auto" option doesn't always report accurate results. Set a valid coin value to adjust the result. Can be used instead of "fees". (default 200000)
--gas-adjustment float adjustment factor to be multiplied against the estimate returned by the tx simulation; if the gas limit is set manually this flag is ignored (default 1)
--gas-prices string Gas prices in decimal format to determine the transaction fee (e.g. 0.1uatom)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase only accessed when providing a key name)
-h, --help help for self-create-participant
--keyring-backend string Select keyring's backend (os|file|kwallet|pass|test|memory) (default "os")
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--node string <host>:<port> to CometBFT rpc interface for this chain (default "tcp://localhost:26657")
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality)
-o, --output string Output format (text|json) (default "json")
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json|direct-aux|textual), this is an advanced feature
--timeout-duration duration TimeoutDuration is the duration the transaction will be considered valid in the mempool. The transaction's unordered nonce will be set to the time of transaction creation + the duration value passed. If the transaction is still in the mempool, and the block time has passed the time of submission + TimeoutDuration, the transaction will be rejected.
--timeout-height uint DEPRECATED: Please use --timeout-duration instead. Set a block timeout height to prevent the tx from being committed past a certain height
--tip string Tip is the amount that is going to be transferred to the fee payer on the target chain. This flag is only valid when used with --aux, and is ignored if the target chain didn't enable the TipDecorator
--unordered Enable unordered transaction delivery; must be used in conjunction with --timeout-duration
--validation-fees uint
--verification-fees uint
--vs-operator account address or key name
--vs-operator-authz-fee-spend-limit cosmos.base.v1beta1.Coin (repeated)
--vs-operator-authz-msg-types strings
--vs-operator-authz-period duration
--vs-operator-authz-spend-limit cosmos.base.v1beta1.Coin (repeated)
--vs-operator-authz-with-feegrant
-y, --yes Skip tx broadcasting prompt confirmation
set-participant-effective-until
Adjust a participant's effective duration. Can be executed by the authority (for ECOSYSTEM or self-created participants) or by the validator (for VP managed participants).
Usage:
veranad tx pp set-participant-effective-until [id] [effective-until] [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--aux Generate aux signer data instead of sending a tx
-b, --broadcast-mode string Transaction broadcasting mode (sync|async) (default "sync")
--chain-id string The network chain ID
--corporation account address or key name The group policy address (corporation) on whose behalf this message is executed
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it (when enabled, the local Keybase is not accessible)
--fee-granter string Fee granter grants fees for the transaction
--fee-payer string Fee payer pays fees for the transaction instead of deducting from the signer
--fees string Fees to pay along with transaction; eg: 10uatom
--from string Name or address of private key with which to sign
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically. Note: "auto" option doesn't always report accurate results. Set a valid coin value to adjust the result. Can be used instead of "fees". (default 200000)
--gas-adjustment float adjustment factor to be multiplied against the estimate returned by the tx simulation; if the gas limit is set manually this flag is ignored (default 1)
--gas-prices string Gas prices in decimal format to determine the transaction fee (e.g. 0.1uatom)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase only accessed when providing a key name)
-h, --help help for set-participant-effective-until
--keyring-backend string Select keyring's backend (os|file|kwallet|pass|test|memory) (default "os")
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--node string <host>:<port> to CometBFT rpc interface for this chain (default "tcp://localhost:26657")
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality)
-o, --output string Output format (text|json) (default "json")
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json|direct-aux|textual), this is an advanced feature
--timeout-duration duration TimeoutDuration is the duration the transaction will be considered valid in the mempool. The transaction's unordered nonce will be set to the time of transaction creation + the duration value passed. If the transaction is still in the mempool, and the block time has passed the time of submission + TimeoutDuration, the transaction will be rejected.
--timeout-height uint DEPRECATED: Please use --timeout-duration instead. Set a block timeout height to prevent the tx from being committed past a certain height
--tip string Tip is the amount that is going to be transferred to the fee payer on the target chain. This flag is only valid when used with --aux, and is ignored if the target chain didn't enable the TipDecorator
--unordered Enable unordered transaction delivery; must be used in conjunction with --timeout-duration
-y, --yes Skip tx broadcasting prompt confirmation
set-participant-op-validated
Set a participant validation process to validated state.
Requires authority/operator authorization. The authority must be the validator participant's authority.
Parameters:
- id: ID of the participant to validate
- authority: Group account (corporation) on whose behalf this message is executed
- effective-until: Optional timestamp until when this participant is effective (RFC3339 format)
- validation-fees: Validation fees (mandatory, 0 for no fees)
- issuance-fees: Issuance fees (mandatory, 0 for no fees)
- verification-fees: Verification fees (mandatory, 0 for no fees)
- op-summary-digest-sri: Optional digest SRI of validation information
- issuance-fee-discount: Issuance fee discount (0-10000, where 10000 = 100% discount, default 0)
- verification-fee-discount: Verification fee discount (0-10000, where 10000 = 100% discount, default 0)
Usage:
veranad tx pp set-participant-op-validated [id] [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--aux Generate aux signer data instead of sending a tx
-b, --broadcast-mode string Transaction broadcasting mode (sync|async) (default "sync")
--chain-id string The network chain ID
--corporation account address or key name Group account (corporation) on whose behalf this message is executed
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it (when enabled, the local Keybase is not accessible)
--effective-until timestamp (RFC 3339) Timestamp until when this participant is effective (RFC3339)
--fee-granter string Fee granter grants fees for the transaction
--fee-payer string Fee payer pays fees for the transaction instead of deducting from the signer
--fees string Fees to pay along with transaction; eg: 10uatom
--from string Name or address of private key with which to sign
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically. Note: "auto" option doesn't always report accurate results. Set a valid coin value to adjust the result. Can be used instead of "fees". (default 200000)
--gas-adjustment float adjustment factor to be multiplied against the estimate returned by the tx simulation; if the gas limit is set manually this flag is ignored (default 1)
--gas-prices string Gas prices in decimal format to determine the transaction fee (e.g. 0.1uatom)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase only accessed when providing a key name)
-h, --help help for set-participant-op-validated
--issuance-fee-discount uint Issuance fee discount (0-10000, where 10000 = 100% discount)
--issuance-fees uint Issuance fees
--keyring-backend string Select keyring's backend (os|file|kwallet|pass|test|memory) (default "os")
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--node string <host>:<port> to CometBFT rpc interface for this chain (default "tcp://localhost:26657")
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality)
--op-summary-digest string Digest SRI of validation information
-o, --output string Output format (text|json) (default "json")
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json|direct-aux|textual), this is an advanced feature
--timeout-duration duration TimeoutDuration is the duration the transaction will be considered valid in the mempool. The transaction's unordered nonce will be set to the time of transaction creation + the duration value passed. If the transaction is still in the mempool, and the block time has passed the time of submission + TimeoutDuration, the transaction will be rejected.
--timeout-height uint DEPRECATED: Please use --timeout-duration instead. Set a block timeout height to prevent the tx from being committed past a certain height
--tip string Tip is the amount that is going to be transferred to the fee payer on the target chain. This flag is only valid when used with --aux, and is ignored if the target chain didn't enable the TipDecorator
--unordered Enable unordered transaction delivery; must be used in conjunction with --timeout-duration
--validation-fees uint Validation fees
--verification-fee-discount uint Verification fee discount (0-10000, where 10000 = 100% discount)
--verification-fees uint Verification fees
-y, --yes Skip tx broadcasting prompt confirmation
slash-participant-td
Slash a participant's trust deposit. Requires a non-empty reason per [MOD-PP-MSG-12-1].
Usage:
veranad tx pp slash-participant-td [id] [amount] [reason] [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--aux Generate aux signer data instead of sending a tx
-b, --broadcast-mode string Transaction broadcasting mode (sync|async) (default "sync")
--chain-id string The network chain ID
--corporation account address or key name The group policy address (corporation) on whose behalf this message is executed
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it (when enabled, the local Keybase is not accessible)
--fee-granter string Fee granter grants fees for the transaction
--fee-payer string Fee payer pays fees for the transaction instead of deducting from the signer
--fees string Fees to pay along with transaction; eg: 10uatom
--from string Name or address of private key with which to sign
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically. Note: "auto" option doesn't always report accurate results. Set a valid coin value to adjust the result. Can be used instead of "fees". (default 200000)
--gas-adjustment float adjustment factor to be multiplied against the estimate returned by the tx simulation; if the gas limit is set manually this flag is ignored (default 1)
--gas-prices string Gas prices in decimal format to determine the transaction fee (e.g. 0.1uatom)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase only accessed when providing a key name)
-h, --help help for slash-participant-td
--keyring-backend string Select keyring's backend (os|file|kwallet|pass|test|memory) (default "os")
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--node string <host>:<port> to CometBFT rpc interface for this chain (default "tcp://localhost:26657")
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality)
-o, --output string Output format (text|json) (default "json")
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json|direct-aux|textual), this is an advanced feature
--timeout-duration duration TimeoutDuration is the duration the transaction will be considered valid in the mempool. The transaction's unordered nonce will be set to the time of transaction creation + the duration value passed. If the transaction is still in the mempool, and the block time has passed the time of submission + TimeoutDuration, the transaction will be rejected.
--timeout-height uint DEPRECATED: Please use --timeout-duration instead. Set a block timeout height to prevent the tx from being committed past a certain height
--tip string Tip is the amount that is going to be transferred to the fee payer on the target chain. This flag is only valid when used with --aux, and is ignored if the target chain didn't enable the TipDecorator
--unordered Enable unordered transaction delivery; must be used in conjunction with --timeout-duration
-y, --yes Skip tx broadcasting prompt confirmation
start-participant-op
Start a new participant validation process with the specified parameters:
- type: Participant type (issuer, verifier, issuer-grantor, verifier-grantor, ecosystem, holder)
- validator-participant-id: ID of the validator participant
- did: DID for this participant (mandatory, must conform to DID syntax)
Usage:
veranad tx pp start-participant-op [role] [validator-participant-id] [did] [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--aux Generate aux signer data instead of sending a tx
-b, --broadcast-mode string Transaction broadcasting mode (sync|async) (default "sync")
--chain-id string The network chain ID
--corporation account address or key name Group account (corporation) on whose behalf this message is executed
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it (when enabled, the local Keybase is not accessible)
--fee-granter string Fee granter grants fees for the transaction
--fee-payer string Fee payer pays fees for the transaction instead of deducting from the signer
--fees string Fees to pay along with transaction; eg: 10uatom
--from string Name or address of private key with which to sign
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically. Note: "auto" option doesn't always report accurate results. Set a valid coin value to adjust the result. Can be used instead of "fees". (default 200000)
--gas-adjustment float adjustment factor to be multiplied against the estimate returned by the tx simulation; if the gas limit is set manually this flag is ignored (default 1)
--gas-prices string Gas prices in decimal format to determine the transaction fee (e.g. 0.1uatom)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase only accessed when providing a key name)
-h, --help help for start-participant-op
--issuance-fees verana.pp.v1.OptionalUInt64 (json) Optional requested issuance fees (can be modified by validator)
--keyring-backend string Select keyring's backend (os|file|kwallet|pass|test|memory) (default "os")
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--node string <host>:<port> to CometBFT rpc interface for this chain (default "tcp://localhost:26657")
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality)
-o, --output string Output format (text|json) (default "json")
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json|direct-aux|textual), this is an advanced feature
--timeout-duration duration TimeoutDuration is the duration the transaction will be considered valid in the mempool. The transaction's unordered nonce will be set to the time of transaction creation + the duration value passed. If the transaction is still in the mempool, and the block time has passed the time of submission + TimeoutDuration, the transaction will be rejected.
--timeout-height uint DEPRECATED: Please use --timeout-duration instead. Set a block timeout height to prevent the tx from being committed past a certain height
--tip string Tip is the amount that is going to be transferred to the fee payer on the target chain. This flag is only valid when used with --aux, and is ignored if the target chain didn't enable the TipDecorator
--unordered Enable unordered transaction delivery; must be used in conjunction with --timeout-duration
--validation-fees verana.pp.v1.OptionalUInt64 (json) Optional requested validation fees (can be modified by validator)
--verification-fees verana.pp.v1.OptionalUInt64 (json) Optional requested verification fees (can be modified by validator)
--vs-operator account address or key name Optional Verifiable Service operator account address
--vs-operator-authz-fee-spend-limit cosmos.base.v1beta1.Coin (repeated)
--vs-operator-authz-msg-types strings Delegable msg types granted to vs_operator (presence triggers a VSOA record)
--vs-operator-authz-period duration
--vs-operator-authz-spend-limit cosmos.base.v1beta1.Coin (repeated)
--vs-operator-authz-with-feegrant Enable fee grant for vs_operator
-y, --yes Skip tx broadcasting prompt confirmation
trigger-resolver
Emit an on-chain event signaling that a trust resolver must re-resolve the did registered in the participant entry. Does not modify VPR state.
Parameters:
- id: ID of the participant for which a trust resolution must be triggered
- corporation: The group policy address (corporation) on whose behalf this message is executed
The operator (signer) is taken from --from.
Usage:
veranad tx pp trigger-resolver [id] --corporation [corporation] [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--aux Generate aux signer data instead of sending a tx
-b, --broadcast-mode string Transaction broadcasting mode (sync|async) (default "sync")
--chain-id string The network chain ID
--corporation account address or key name The group policy address (corporation) on whose behalf this message is executed
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it (when enabled, the local Keybase is not accessible)
--fee-granter string Fee granter grants fees for the transaction
--fee-payer string Fee payer pays fees for the transaction instead of deducting from the signer
--fees string Fees to pay along with transaction; eg: 10uatom
--from string Name or address of private key with which to sign
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically. Note: "auto" option doesn't always report accurate results. Set a valid coin value to adjust the result. Can be used instead of "fees". (default 200000)
--gas-adjustment float adjustment factor to be multiplied against the estimate returned by the tx simulation; if the gas limit is set manually this flag is ignored (default 1)
--gas-prices string Gas prices in decimal format to determine the transaction fee (e.g. 0.1uatom)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase only accessed when providing a key name)
-h, --help help for trigger-resolver
--keyring-backend string Select keyring's backend (os|file|kwallet|pass|test|memory) (default "os")
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--node string <host>:<port> to CometBFT rpc interface for this chain (default "tcp://localhost:26657")
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality)
-o, --output string Output format (text|json) (default "json")
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json|direct-aux|textual), this is an advanced feature
--timeout-duration duration TimeoutDuration is the duration the transaction will be considered valid in the mempool. The transaction's unordered nonce will be set to the time of transaction creation + the duration value passed. If the transaction is still in the mempool, and the block time has passed the time of submission + TimeoutDuration, the transaction will be rejected.
--timeout-height uint DEPRECATED: Please use --timeout-duration instead. Set a block timeout height to prevent the tx from being committed past a certain height
--tip string Tip is the amount that is going to be transferred to the fee payer on the target chain. This flag is only valid when used with --aux, and is ignored if the target chain didn't enable the TipDecorator
--unordered Enable unordered transaction delivery; must be used in conjunction with --timeout-duration
-y, --yes Skip tx broadcasting prompt confirmation
veranad query pp
find-beneficiaries
Find beneficiary participants by traversing the participant tree for issuer and/or verifier participants. At least one of issuer-participant-id or verifier-participant-id must be provided.
Usage:
veranad query pp find-beneficiaries [flags]
Flags:
--grpc-addr string the gRPC endpoint to use for this chain
--grpc-insecure allow gRPC over insecure channels, if not the server must use TLS
--height int Use a specific height to query state at (this can error if the node is pruning state)
-h, --help help for find-beneficiaries
--issuer-participant-id uint ID of the issuer participant
--keyring-backend string Select keyring's backend (os|file|kwallet|pass|test|memory) (default "os")
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--no-indent Do not indent JSON output
--node string <host>:<port> to CometBFT RPC interface for this chain (default "tcp://localhost:26657")
-o, --output string Output format (text|json) (default "text")
--verifier-participant-id uint ID of the verifier participant
get-participant
Get detailed information about a participant by its ID
Usage:
veranad query pp get-participant [id] [flags]
Flags:
--grpc-addr string the gRPC endpoint to use for this chain
--grpc-insecure allow gRPC over insecure channels, if not the server must use TLS
--height int Use a specific height to query state at (this can error if the node is pruning state)
-h, --help help for get-participant
--keyring-backend string Select keyring's backend (os|file|kwallet|pass|test|memory) (default "os")
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--no-indent Do not indent JSON output
--node string <host>:<port> to CometBFT RPC interface for this chain (default "tcp://localhost:26657")
-o, --output string Output format (text|json) (default "text")
get-participant-session
Get details about a specific participant session by its ID
Usage:
veranad query pp get-participant-session [id] [flags]
Flags:
--grpc-addr string the gRPC endpoint to use for this chain
--grpc-insecure allow gRPC over insecure channels, if not the server must use TLS
--height int Use a specific height to query state at (this can error if the node is pruning state)
-h, --help help for get-participant-session
--keyring-backend string Select keyring's backend (os|file|kwallet|pass|test|memory) (default "os")
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--no-indent Do not indent JSON output
--node string <host>:<port> to CometBFT RPC interface for this chain (default "tcp://localhost:26657")
-o, --output string Output format (text|json) (default "text")
list-participant-sessions
List all participant sessions with optional filtering and pagination
Usage:
veranad query pp list-participant-sessions [flags]
Flags:
--grpc-addr string the gRPC endpoint to use for this chain
--grpc-insecure allow gRPC over insecure channels, if not the server must use TLS
--height int Use a specific height to query state at (this can error if the node is pruning state)
-h, --help help for list-participant-sessions
--keyring-backend string Select keyring's backend (os|file|kwallet|pass|test|memory) (default "os")
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--modified-after timestamp (RFC 3339) Filter by modified time (RFC3339 format)
--no-indent Do not indent JSON output
--node string <host>:<port> to CometBFT RPC interface for this chain (default "tcp://localhost:26657")
-o, --output string Output format (text|json) (default "text")
--response-max-size uint32 Maximum number of results to return (1-1024)
list-participants
List all participants with optional filtering by modified time and pagination
Usage:
veranad query pp list-participants [flags]
Flags:
--did string
--grantee string
--grpc-addr string the gRPC endpoint to use for this chain
--grpc-insecure allow gRPC over insecure channels, if not the server must use TLS
--height int Use a specific height to query state at (this can error if the node is pruning state)
-h, --help help for list-participants
--keyring-backend string Select keyring's backend (os|file|kwallet|pass|test|memory) (default "os")
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--modified-after timestamp (RFC 3339) Filter by modified time (RFC3339 format)
--no-indent Do not indent JSON output
--node string <host>:<port> to CometBFT RPC interface for this chain (default "tcp://localhost:26657")
--only-repaid
--only-slashed
--only-valid
--op-state OnboardingState (unspecified | pending | validated | terminated) (default unspecified)
-o, --output string Output format (text|json) (default "text")
--participant-id uint
--response-max-size uint32 Maximum number of results to return (1-1024)
--role ParticipantRole (unspecified | issuer | verifier | issuer-grantor | verifier-grantor | ecosystem | holder) (default unspecified)
--schema-id uint
--when timestamp (RFC 3339)
params
Shows the parameters of the module
Usage:
veranad query pp params [flags]
Flags:
--grpc-addr string the gRPC endpoint to use for this chain
--grpc-insecure allow gRPC over insecure channels, if not the server must use TLS
--height int Use a specific height to query state at (this can error if the node is pruning state)
-h, --help help for params
--keyring-backend string Select keyring's backend (os|file|kwallet|pass|test|memory) (default "os")
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--no-indent Do not indent JSON output
--node string <host>:<port> to CometBFT RPC interface for this chain (default "tcp://localhost:26657")
-o, --output string Output format (text|json) (default "text")